|
Capacity List:
Main Complex comprising of Construction Shops as follows:
|
No.1 Shop (Fabrication)
|
Area:
|
|
|
No.2 Shop (Fabrication)
|
Area:
|
|
|
No.3 Shop (Fabrication)
|
Area:
|
|
|
No.4 Shop (Blasting)
|
Area:
|
|
|
No.5 Shop (Metal Spraying)
|
Area:
|
|
|
No.6 Shop (Painting)
|
Area:
|
|
|
No.7 Shop (Machine Shop)
|
Area:
|
|
Cranage
Overhead Cranes of the following capacity in the Fabrication Shop (Maximum headroom 7m)
|
4 No
|
20 tonne
|
|
3 No
|
15 tonne
|
|
2 No
|
6 tonne
|
|
1 No
|
5 tonne
|
|
2 No.Fork Lifts
|
15 tonne
|
Shot-Blasting Shop - 31m long x 5m wide x 5m high
Approx Area: 150m sq
|
1 No Ingersol Rand Compressor SSR M250
|
1600 cfm
|
|
1 No Ingersol Rand Compressor SSR M75
|
450 cfm
|
|
1 No Mobile Compressor
|
125 cfm
|
|
4 No Shot-blast kettles
|
600 kg
|
Metal Spraying Facilities including 5 No Metallisation Mk 73 Hot Metal Spray Guns for Aluminium 6mm Wire.
Paint Shop - 62m long x 30m wide x 10m high
Approx Area: 1800m sq
|
2 no. Graco "King" Airless Spray Units
|
60 3:1 ratio
|
|
2 no. Graco "King" Airless Spray Units
|
45:1 ratio
|
Personnel: All staff are fully trained and experienced operatives; qualified supervision is applied at all times.
Drills: 14 No Drills, Consisting of Radial (2m Beam), Pillar and Mag with capacity from 35mm up to 75mm
Machine Tools: 3 No Metal Workers - Capacity 65 to 125 tonnes
Profiler: 1 No - Quadruple-head CNC
Saws: 2 No Band Saws - 300mm
Hydraulic Presses: 2 No - 1 No 10 tonne x 2.5mm and 1 No 20 tonne
Pyramid Rolls: 1 No - 12mm x 2m
Welding Plant
|
2 No MIG Welding Rectifiers
|
650 amp
|
|
2 No MIG Welding Rectifiers
|
500 amp
|
|
25 No MIG Welding Rectifiers
|
400 amp
|
|
13 No MIG Welding Rectifiers
|
350 amp
|
|
3 No Sets of Rotators
|
|
|
Facilities are also available for manual metal or submerged arc and stud welding.
|
Compressors:
1 No Ingersol Rand Compressor SSR M250 1600 cfm and 1 No Ingersol Rand Compressor SSR M75 450 cfm
Transport:
|
2 No Tractor Units
|
1 No 80 tonne x 6 wheel and 1 No 44 tonne x 6 wheel
|
|
3 No Rigid Trailers
|
2 No 12m and 1 No 18m
|
|
2 No Steerable Bogies
|
1 No 3 axle / 60 tonne gross and 1 No 2 axle / 40 tonne gross
|
|
2 No Trombone Trailers
|
1 No 2 axle / 40 tonne 16m - 22m 1 No 2 axle / 20 tonne 12m - 18m
|
|
1 No Step Frame Trombone Trailer
|
3 axle / 18 tonnes 12m – 18m
|
|
1 No Step Frame Rigid Trailer
|
12m
|
|
2 No Cherry Pickers
|
each 13.4m Boom
|
|
2 No Erection Vans
|
each 1.8 tonne
|
|
1 No Astra Van
|
|
Inspection:
MPI, UT inspection carried out by 3rd party PCN qualified personnel (see the QA department for further information).
Erection:
Full facilities provided on site throughout the UK. Field supervision and resources available worldwide.
Design:
Full and experienced design facilities available, complimented by experienced in-house detail draughtsmen.
|
